管道过滤器

过滤器是从流体中分离固体颗粒杂质，提高产品纯度，保护设备（压缩机、泵、仪表等）安全工作的产品。

Filter is a kind of small equipment that eliminates a small mount of rounds from liquid. It can protect normal operation for compressor, pump and other equipment as well as instruments and is also a small equipment to increase product pureness and purify gas. Soit can be widely used in pertroleum and chemical fiber, medicine, food etc.

主要技术参数

Main technical parameters:

适用的物料有：

Applicable medium:

①、化工、石油化生产中的弱腐蚀性物料，如：水、氨、油品、烃类等。

    Weak corrosively medium for petrochemical production such as waterammoniaoil hydrocarbon products and etc.

②、化工生产品中的腐蚀性物料，如：烧碱、纯碱、浓稀硫酸、碳酸、醋酸等。

    Corrosively medium for chemical production such as sodium hydrate,caustic soda,sulfuric acid,nitric acid,acetic acid,fatty acid.

③、冷中的低温物料，如：液甲烷、液氨、液氧和各种冷剂。

    Low temperature medium for refrigeration, the refrigerant such as liquefied methane,liquefied ammonia,oxygen and etc.

④、轻工食品、制药生产中有卫生要求的物料，如：啤酒、饮料、乳制品、粮浆医药用品等。

    Industry hygiene medium in leightindustry,foodstuff and pharmacy such as beerdrinkbeverage dairy products,syrup medical articles for use and etc.

⑤、各种特殊工艺的高效精密过滤器等。

    For va rious special behavior high efficiency fine filter.   

工作温度（℃）：碳钢：-30~380℃，不锈钢：-80~450℃。

Operating Temperature (℃):CS:- -30~380℃，SS:-80~450℃。

工作压力（MPa）：-0.6~5.0MPa

Operating Pressure (Mpa): -0.6~5.0MPa

壳体材质：A3、SS304、SS304L、SS316、SS316L、衬PP、H62等。

Body Material:A3、SS304、SS304L、SS316、SS316L、衬PP、H62 and so on。

密封材质：耐油石棉橡胶、丁睛橡胶、聚四氟乙烯。

Seal Material:Asbestos、NBR、PTFE

粗过滤滤芯材质：滤框、滤网均为不锈钢。

Strainer Element Material:Sreen Mesh Material:ss

精过滤滤芯材质：钛合金烧结滤芯、不锈钢折叠滤芯、聚四氟折叠滤芯、聚丙烯折叠滤芯、金属纤维烧结管毡、陶瓷。

Precision Filter Element Material:Sinter A1 Alloy Filter element、Fold Stainless filter element、Fold

PTFE Filter element Fold HPPfilter element、Sintered metal Cotton Rayon filter element、Ceramic

法兰标准：HG2059-97PN1.0当客户需用GB、SH、HGJ、JB、ANSI、JIS或等标准或改变压力等级时，请在订货合同中注明。

Flanges of the valve are in accordance with HG20594-97 PN1.0.When GB、SH、HGJ、JB、ANSI、JIS

If changed,buyer shall illustrate in the contract.

制造、检测标准：执行GB150标准。或客户指定标准。

Code for manufacturing and inspection:GB150,or specified by buyers.

不锈钢钢丝的技术特性（英制）       S.Swire Gauze Parameter (Brirish Unit)